Instrument

Leitz WILD Biomed Type 020-507.010 Microscope

Leitz WILD Biomed Type 020-507.010 Microscope

Specifications (see manual for details):

Serial no: 512925 125371
Objectives
    PL 2.5/0.08 160/-
    EF 10/0.25 160/-
    EF 40/0.65 160/0.17
    EF 100/1.25 160/0.17 OEL
Eyepiece: GF-P 10x/18
Lamp 6v 20W Halogen Osram 64250. 

Leica DM LB Research Grade Microscope

Leica DM LB Research Grade Microscope

Specifications (see manual for details):

Research Grade Microscope with internal light and phase contrast condenser
Serialno: 501504
Objectives
    4x/0.10 CPLAN
    10x/0.25 NPLAN
    40x/0.65 NPLAN
    100x/1.25 Oil PH3
Eyepiece: HC Plans 10x/22
Lamp 12V 30W Osram 64261

Leica DM IL Inverted Microscope

Leica DM IL Inverted Microscope

Specifications (see manual for details):

Inverted Microscope with florescence and phase contrast condenser
Objectives
    10/0.20 PHACO 1a 160/-
    EFL 20/0.30 PHACO 1a 160/1.5
    L 40/0.50 PHACO 1a 160/1.1
    EF 100/1.25 160/0.17
Eyepiece: periplan 10x/18
Note: 3 mm Allen key and small Phillips head screwdriver needed to replace mercury bulb in fluorescence source.
Lamp FL, 50WA/C L1 NOT AVAILABLE ANYMORE.  Normal light, 6V35W Osram 64275

Leica WILD Aviopret APT 2 Stereoscope with light bench

Leica WILD Aviopret APT 2 Stereoscope with light bench

Specifications (see manual for details):

Magnification 3 to 15.5 x
Eyepiece: 10x/21B
Lamps
    Upper: 2 units 50cm warm with light tubes, Osram 25 Concentra R50
    Light table (lower): 2 units of 6V 20W Osram 64250

Retsch Ultra Centrifugal Mill ZM 100

Retsch Ultra Centrifugal Mill ZM 100

Specifications (see manual for details):

for grounding soft to medium-hard substances
comes with
Hinged removable cover
Cassette with inserted ring sieve
Quick-release closure for cover
Safety interlock for cover
Proximity switch (safety check)
Funnel with splashback protection
Plate for operation without cassette cover
Push-fit rotor
Ring sieve
Collecting pan

IKA Magnetic Stirrer (KMO 2 Electronic)

IKA Magnetic Stirrer (KMO 2 Electronic)

Specifications (see manual for details):

Design voltage: VAC 230±10% or VAC 115±10%
Design frequency: Hz 50/60
Power consumption: W 14
Power output: W 4
Speed range: rpm ca. 100 to 1100 infinitely variable
Max. stirring quantity (Water) ltr 3
Perm. ambient temperature: °C +5 to +40
Perm. relative humidity: % 80
Dimensions: mm 140 x 200 x 75
Weight: kg 1,4

Consort Microcomputer Electrophoresis power supply E455

Consort Microcomputer Electrophoresis power supply E455

Specifications (see manual for details):

Ranges E455: 0 ... 500 V / 0 ... 500 mA / 0 ... 150 W
Timer 1 ... 999 min. / 0.1 ... 99.9 h
Outputs dual in parallel, floating
Leakage detection > 500 μA
No load detection < 0.1 W
Minimum load
resistance E455: > 15 Ω
E431: > 5 Ω
Ambient temp. 4 ... 40°C
Rel. humidity 0 ... 90 % (non-condensing!)
Power supply 210-250 V~, 50/60 Hz
Cabinet rugged plastic/metal cabinet
Dimensions 300 x 120 x 180 mm
Weight 5 kg

IKA Grinder A10

IKA Grinder A10

Quantity: 4

Specifications (see manual for details):

Analytical grinder
Suitable for carrying out low-loss grinding of hard and brittle substances as of grain size 6-7 mm
Technical specifications: 220 V, 50 Hz, 0,9 A, 200 W
Maximum number of revolutions: 20.000 rpm
Short-time operation: 5 min
Capacity grinding chamber: 50 ml
Housing(D)x(H)x(W): 10 x 21 x 10 cm
Dimensions grinding chamber (ø)x(H): 6 x 3 cm

Magnetic stirrer (Heidolph/Kebo Lab MR 1000)

Magnetic stirrer (Heidolph/Kebo Lab MR 1000)

Quantity: 2

Specifications (see manual for details):

stirrer drive: split-pole motor, electronic speed control, overheat protection
speed range: 0 – 2200 rpm
speed control: scale marks
supply voltage: 230 volts / 50 Hz; 115 volts / 60 Hz (optional)
protective class: II (protective insulation)
power dissipation: 7 watts
weight: 1.2 kg
dimensions (w x d x h): 120 mm x 140 mm x 80 mm
ambient specifications: 0 – 50 °C at 80 % rel. humidity
chemical resistance housing: polyamide; top plate PVDF

Mechatec LyoDry Compact Benchtop Freeze Dryer

Mechatec LyoDry Compact Benchtop Freeze Dryer

Specifications (see manual for details):

  • This is the ice condenser section of a freeze drying system

  • suitable for freeze drying biological preparations in a lab

  • only requires the attachment of a suitable vacuum pump and drying accessory to form a complete freeze drying system

  • is also suitable for use on other vacuum duties, including evaporation and distillation processes

  • has a condenser chamber, a refrigeration system and a control system which includes temperature and pressure indication and user controls

  • the refrigerant used in the LyoDry Compact is CFC free

  • All of the LyoDry Compact components are all housed in a stainless steel cabinet which is designed for bench-top use

  • When used with suitable accessories, it can be used to freeze dry materials in bulk trays, round-bottomed flasks, vials or ampoules

  • Alternatively, it can be used as a low-temperature vapour trap (or cold trap) that may be attached to an existing evaporation facility

Multi-Mode Microplate Reader (Spectra Max M3)

Multi-Mode Microplate Reader (Spectra Max M3)

Note: This instrument is owned by a researcher and not intended for general use. Please contact Ellen Dorrepaal for further information.

Specifications (see manual for details):

does UV and visible absorbance, and fluorescence intensity measurements on microplates and cuvettes
accept cuvettes and 6-, 12-, 24-, 48-, 96-, and 384-well microplates
standard features include spectral scanning across the wavelength range in 1 nm increments, up to six absorbance wavelengths per read, and up to four wavelength pairs for other read modes

Plate Formats: 6, 12, 24, 48, 96, 384 wells
Light Source: Xenon Flash Lamp (1 joule/flash)
Detectors: 2 photomultiplier tubes
ShakerTime: 0 to 999 seconds
Temperature Control: 2 °C above ambient to 60 °C
Temperature Uniformity: < 1°C at 37°C set point
Temperature Accuracy: ±1°C at 37°C set point
Endpoint Reading: All modes
Kinetic Reading: All modes
Spectral Scanning: All modes
Well Scanning: Abs, FI, Lum